Evolux Fiber Fiber Optic Patch Cord Mtp To Fc Apc 24core Om3 3.0mm support data center migration to higher data rates when utilized with our trunks. MTP® cables are an efficient solution for high-density fiber patching in data centers, eliminating the need for time-consuming field termination. They are designed to save space and simplify cable management while providing cost-effective patching options within cabinets.
Specification
| Connector A | MTP Female (Pinless) | Connector B | FC APC |
| Fiber Mode | OM3 50/125μm | Wavelength | 850/1300nm |
| 40/100G Ethernet Distance | 150m at 850nm | 10G Ethernet Distance | 400m at 850nm |
| MTP Connector IL | 0.35dB Max (0.15dB Typ.) | FC Connector IL | ≤0.2dB |
| MTP Connector RL | ≥20dB | FC Connector RL | ≥30dB |
| Attenuation at 850nm | ≤2.3dB/km | Attenuation at 1300nm | ≤0.6dB/km |
| Cable Jacket | Plenum (OFNP) | Fiber Count | 24 Fibers |
| Cable Outside Diameter (OD) | 3.0mm | Breakout Outside Diameter (OD) | 2.0mm |
| Installation Tensile Load | 66N | Tensile Strength (Long/Short Term) | 80/240N |
| Operating Temperature | (-10 to 60°C (14 to 140℉) | Storage Temperature | (-10 to 70°C (14 to 158℉) |
Features
Top-quality Craftsmanship ensures a relable transmission
-MTP Connector:Providing consistent signals and enabling adaptable system design.
-Fiber:Enabling increased flexibility in cable routing and storage through tighter bends.
-Jacket:Reducing damage potential through fire-resistant and low-smoke materials.
Optimizing cabling density to meet various environmental conditions.
- Reducing installation costs by minimizing waste, improving cable management and streamlining deployment.
Upgrading your network is made easy with a user-friendly plug-in.
- MTP®-FC harness cables facilitate rapid data rate upgrades, including the migration from 10G to 40G.
Applications
- 10G to 40G Data Center Network Migration MTP-FC harness architecture aggregates existing FC-based 10G connections into a single 24-fiber MTP trunk, supporting phased migration to 40G without full infrastructure replacement.
- 40G QSFP+ to FC Legacy Equipment Interconnects Bridges 40G QSFP+ MTP ports on modern switches to FC APC ports on legacy optical instruments or older network devices still in active service.
- High-Density Fiber Consolidation in Server Rooms Consolidates 24 individual FC connections into a single MTP interface, reducing patch panel port count and cutting cable bulk to improve airflow in dense rack environments.
- Plenum Data Center Fabric Expansions OFNP-rated for compliant deployment in open-ceiling data center expansions where fire-code-rated cabling is mandatory in shared plenum spaces.
- OM3 Multimode Test Lab Fiber Patching Suited for OM3-based test environments requiring repeatable, pre-terminated 24-fiber connections between test chassis MTP ports and FC-terminated instruments with verified per-fiber insertion loss.
FAQ
Q: What data rates does this 24-fiber MTP to FC APC OM3 cable support?
A: The OM3 50/125μm fiber supports 40G Ethernet at up to 150m and 10G Ethernet at up to 400m at 850nm, providing headroom for phased data rate upgrades without replacing the physical cabling layer.
Q: How does this harness support 10G to 40G network migration?
A: MTP-FC harness cables aggregate 24 individual FC 10G links into a single MTP interface. Network teams can consolidate existing FC connections behind an MTP trunk port as they upgrade switch line cards to 40G QSFP+, avoiding full recabling of the patching layer.
Q: Why choose a pre-terminated 24-fiber MTP harness over individual FC patch cords?
A: A single pre-terminated 24-fiber harness replaces 24 separate FC cables, eliminates 24 individual field termination points as potential failure locations, and significantly reduces cable bulk in patch panels to improve rack airflow.
Q: What is the insertion loss specification for the MTP connector on this cable?
A: ≤0.35dB maximum, with a typical value of 0.15dB. FC APC connectors are rated ≤0.2dB insertion loss and ≥30dB return loss.
Q: What does FC APC mean and why does return loss matter?
A: FC APC (Angled Physical Contact) uses an 8-degree angled ferrule polish that reflects back-reflected light away from the fiber core, achieving ≥30dB return loss - important in systems where back-reflection causes signal noise, such as analog CATV or coherent optical applications.
Q: Is the OFNP jacket required for my installation?
A: OFNP is required by NEC Article 770 whenever the cable route passes through a plenum air-handling space. If your run is entirely within conduit or a non-plenum cable tray, other jacket types may be acceptable - but OFNP provides compliance coverage for the widest range of data center installation environments.
Hot Tags: 24-Fiber MTP to FC APC OM3 Patch Cord for 40G Data Center Network Migration, China 24-Fiber MTP to FC APC OM3 Patch Cord for 40G Data Center Network Migration manufacturers, suppliers, factory, lc fiber optic patch cord, fiber optic patch cord for 5g network, fiber optic patch cord with st connector, fiber optic patch cord with lc connector, fiber optic patch cord, fiber optic transmission cord
