Evolux Fiber Fiber Optic Patch Cord Mtp To Fc Apc 24core Yellow 3.0mm support data center migration to higher data rates when utilized with our trunks. MTP® cables are an efficient solution for high-density fiber patching in data centers, eliminating the need for time-consuming field termination. They are designed to save space and simplify cable management while providing cost-effective patching options within cabinets.
Specification
| Connector A | MTP Female (Pinless) | Connector B | FC APC |
| Fiber Mode | OM3 50/125μm | Wavelength | 850/1300nm |
| 40/100G Ethernet Distance | 150m at 850nm | 10G Ethernet Distance | 400m at 850nm |
| MTP Connector IL | 0.35dB Max (0.15dB Typ.) | FC Connector IL | ≤0.2dB |
| MTP Connector RL | ≥20dB | FC Connector RL | ≥30dB |
| Attenuation at 850nm | ≤2.3dB/km | Attenuation at 1300nm | ≤0.6dB/km |
| Cable Jacket | Plenum (OFNP) | Fiber Count | 24 Fibers |
| Cable Outside Diameter (OD) | 3.0mm | Breakout Outside Diameter (OD) | 2.0mm |
| Installation Tensile Load | 66N | Tensile Strength (Long/Short Term) | 80/240N |
| Operating Temperature | (-10 to 60°C (14 to 140℉) | Storage Temperature | (-10 to 70°C (14 to 158℉) |
Features
Top-quality Craftsmanship ensures a relable transmission
-MTP Connector:Providing consistent signals and enabling adaptable system design.
-Fiber:Enabling increased flexibility in cable routing and storage through tighter bends.
-Jacket:Reducing damage potential through fire-resistant and low-smoke materials.
Optimizing cabling density to meet various environmental conditions.
- Reducing installation costs by minimizing waste, improving cable management and streamlining deployment.
Upgrading your network is made easy with a user-friendly plug-in.
- MTP®-FC harness cables facilitate rapid data rate upgrades, including the migration from 10G to 40G.
Applications
- Plenum-Rated Data Center Cabinet Patching OFNP jacket qualifies this cable for direct installation in ceiling plenum air spaces under NEC Article 770, eliminating conduit costs in open-ceiling data center environments.
- Color-Managed High-Density Rack Patching Color-coded MTP connector boots enable zone-based port identification across multi-rack deployments, reducing mis-patching and speeding up fault isolation in crowded cabinets.
- In-Cabinet MTP to FC APC Breakout Connections Connects MTP trunk ports on patch panels to individual FC APC ports on legacy test equipment or optical switches within a single 3.0mm harness assembly.
- Frequent MAC Operations in Active Racks 3.0mm OD provides added pull resistance for harness cables subject to regular re-patching during moves, adds, and changes in live cabinet environments.
- Broadcast & CATV Facilities with Fire Code Requirements Suited to broadcast routing and CATV distribution facilities where plenum spaces shared with HVAC systems require OFNP-certified fiber interconnects.
FAQ
Q: What does OFNP plenum-rated mean and when is it required?
A: OFNP (Optical Fiber Nonconductive Plenum) means the jacket meets fire resistance and low-smoke requirements for installation in HVAC plenum air spaces. NEC Article 770 mandates OFNP-rated cables for any run passing through a plenum ceiling.
Q: What is the purpose of color-coded MTP connector boots on this cable?
A: In a 24-fiber harness, each breakout leg terminates to a separate FC APC connector. Color-coded boots identify which fiber group maps to which zone or circuit, reducing mis-patching and accelerating fault tracing in high-density rack environments.
Q: What is the minimum bend radius of the Corning ClearCurve® fiber in this cable?
A: 7.5mm at the fiber level, allowing routing through tight cable management guides and around D-rings inside 1U/2U rack slots without exceeding the fiber's macrobend tolerance.
Q: What does MTP Female (Pinless) mean?
A: An MTP Female (Pinless) connector has no alignment guide pins and mates with an MTP Male (Pinned) connector. Confirm your equipment port's pin configuration before ordering to avoid mismatched connections.
Q: Why does the 3.0mm cable diameter matter for cabinet patching?
A: The 3.0mm OD provides greater tensile strength and jacket wall thickness compared to 2.0mm breakout designs, reducing connector damage risk when cables are repeatedly handled during MAC operations in active racks.
Hot Tags: MTP to FC APC Plenum-Rated 24-Fiber OM3 Patch Cord with Color-Coded Connector Boots, China MTP to FC APC Plenum-Rated 24-Fiber OM3 Patch Cord with Color-Coded Connector Boots manufacturers, suppliers, factory, fiber patch cord, duplex fiber optic patch cord, oem fiber optic patch cord, optical connecting cord, fiber optic patch cord with st connector, fiber optic patch cord for gymnasium optical network
