Fiber Optic Pigtail Specifications for Procurement Teams
Start with the parameters below when checking your BOM or sending an RFQ. The values are treated as the confirmed product baseline, so procurement and engineering teams can compare the offered assembly against the required connector, fiber grade, length and jacket before discussing commercial terms.
| Product | Fiber Optic E2000 Pigtail |
|---|---|
| Model | E2000 |
| Connector | E2000 / LSH |
| Connector Protection | Dust-proof cover |
| Polish Type | APC |
| Fiber Mode | 9/125 single mode |
| Fiber Grade | G652D / OS2 |
| Fiber Count | Simplex |
| Standard Length | 1 m / 3 ft |
| Outer Diameter | 0.9 mm |
| Outer Jacket | PVC |
| Minimum Bend Radius | 30 mm |
| Minimum Order Quantity | 100 pieces |
| Listed Supply Ability | 10,000 pieces per month |
| Port | Shenzhen |
| Listed Payment Terms | L/C, D/A, D/P, T/T |
Unconfirmed optical limits, certificate numbers and other numerical claims are intentionally excluded. If your project requires specific test thresholds or compliance documents, add them to the RFQ and ask for written confirmation before approval.
Need a quote that matches your BOM rather than a generic pigtail price?
Work with Evolux as your single mode fiber pigtail supplier to review quantity, specification changes and order requirements before the project moves forward.
Wholesale Single Mode Fiber Pigtails for Telecom Buyers
For a sourcing manager, the value of this assembly is not a long list of generic fiber claims. It is the ability to define the connector interface, polish, fiber grade and physical format clearly enough for quotation, approval and repeat ordering.
A clear connector and fiber combination for the BOM
The assembly combines an LSH interface with APC polishing and G652D 9/125 single mode fiber. That gives engineering and purchasing teams a specific configuration to approve instead of relying on a broad "optical fiber pigtail" description.
Procurement value: fewer specification gaps between RFQ, approval and repeat orders.
Compact simplex construction with defined routing limits
The standard build uses one fiber, a 1 m length, 0.9 mm PVC construction and a listed 30 mm minimum bend radius. Those details give installers a practical baseline for routing and give buyers a consistent physical format to place on the order.
Procurement value: the ordered product is easier to verify against drawings and site requirements.
Connector protection during storage and site staging
The specified LSH connector includes a dust-proof cover. Keeping that protection in place until the assembly is ready for use helps reduce avoidable exposure during warehouse handling, transport and installation staging.
Procurement value: handling requirements are simple to communicate to receiving and installation teams.
APC Fiber Optic Pigtails Built Around a Clear Project BOM
Buyers usually do not need another explanation of what a pigtail is. They need to know whether the offered assembly matches the network design. For this product, the decision starts with four points: the LSH connector interface, APC polish, G652D single mode fiber and the required physical construction.
- Interface first
Confirm the mating equipment requires the LSH connector family before approving the item.
- Polish must match
Keep APC explicit in the BOM, RFQ and receiving specification rather than relying on connector color alone.
- Fiber grade stays visible
State G652D / OS2 and 9/125 so the fiber requirement is not reduced to the vague term "single mode".
- Physical format is part of the order
Length, fiber count, jacket and diameter should be approved together with the connector specification.
Project Ready Optical Fiber Pigtails for Splicing and Termination
This splice-ready assembly is most relevant when the project requires a pre-terminated connector at the equipment or distribution side and a bare fiber end for the planned termination workflow. The buyer should still validate the final installation environment, mating interface and required documentation against the project specification.
Fiber distribution and termination work
Use the specified assembly where a single fiber pigtail will be integrated into a controlled splicing or termination process and the connector interface has already been defined in the project design.
Telecom infrastructure sourcing
The product is suitable for procurement packages that need an OS2 single mode pigtail with an APC connector interface and a repeatable physical specification for ongoing network work.
System integrator and contractor orders
A clearly written BOM helps integrators and contractors align the purchased pigtail with the equipment schedule, installation plan and site-level material control.
Custom Fiber Optic Pigtails for OEM and Bulk Orders
If the standard configuration is not exactly what your project needs, treat it as the quotation baseline and list each requested change separately. Evolux can then review the requirement as an OEM fiber pigtail supplier instead of allowing unconfirmed options to creep into the purchase specification.
Send the details that actually change the quote
- Required order quantity and destination
- Connector and polish requirement
- Fiber type and grade
- Fiber count, length, diameter and jacket
- Label, packaging or project identification requirements
- Required inspection records or compliance documents
- Required delivery date or rollout schedule
Factory Tested Fiber Pigtails with Order Specific Quality Checks
Quality control is most useful when it checks the product against the approved order rather than relying on vague "high quality" language. For a project order, the connector type, polish, fiber grade, construction and requested documents should be agreed before production and verified against the final specification.
Confirm the approved specification
Lock the connector, APC requirement, fiber grade, length, diameter, jacket and quantity before production starts.
01
Check product configuration
Verify the supplied assembly against the approved order details instead of relying only on the model name.
02
Confirm required test documentation
If your project needs defined optical limits or reports, place those requirements in the RFQ so they can be confirmed in writing.
03
Release against the project order
Use the approved specification and documentation requirement as the final receiving reference.
04
Need documentation included with a bulk fiber pigtail order?
Tell Evolux what your customer, tender or engineering team requires before quotation. That is the safest point to confirm reports rather than adding unsupported claims to the product page.
Bulk Fiber Optic Pigtail Packaging and Shipping for Contract Orders
For repeat or multi-site purchasing, packaging should help the receiving team identify the correct material and keep the connector protected until installation. State any project label, batch grouping or carton-mark requirement before the quote is finalized so the packing scope can be reviewed with the order.
- Keep connector protection in place
Protect the connector during storage, shipping and site staging.
- Match packing to project control
Specify individual identification, grouped packing or carton marks when they are required by your warehouse or installer.
- Confirm commercial shipping details
The listed port is Shenzhen; final shipping terms and destination requirements belong in the quotation and purchase order.
Fiber Optic Pigtail MOQ and Lead Time Planning for Buyers
The commercial data below gives sourcing teams a starting point for quantity planning. Lead time should be confirmed against the final quantity, approved specification and delivery requirement rather than published as an unsupported fixed promise.
Minimum order
100 pieces
Useful as the baseline quantity when requesting project pricing.
Listed supply ability
10,000 / month
Share forecast demand when your rollout requires staged or repeat purchasing.
Lead time
Confirm by RFQ
Final timing depends on the approved order scope and delivery schedule.
Evolux Fiber Optic Pigtail Manufacturer for Direct B2B Sourcing
Evolux supports buyers who need a defined fiber pigtail specification carried from quotation into repeat purchasing. On this product, that means keeping the LSH connector, APC polish, G652D / OS2 fiber and physical construction visible in the commercial discussion rather than hiding everything behind a short model code.
For buyers looking for factory-direct fiber optic pigtail sourcing, Evolux can review the standard product against the actual project requirement, identify requested changes and confirm the order scope before production. The goal is simple: give your technical team a product they can approve and your purchasing team a specification they can reorder without unnecessary ambiguity.
Fiber Optic Pigtail Procurement FAQs for B2B Orders
What configuration is supplied as the standard product on this page?
The confirmed baseline uses an E2000/LSH connector with APC polish, G652D / OS2 9/125 single mode fiber, simplex construction, 1 m length and a 0.9 mm PVC jacket. The listed minimum bend radius is 30 mm.
What should I include when requesting a wholesale fiber pigtail quote?
Include quantity, destination, required connector and polish, fiber grade, length, cable diameter, jacket and any packaging or documentation requirements. The Evolux sourcing team can then review the order as a complete project specification instead of quoting from the connector name alone.
Can this single mode pigtail be quoted with project specific requirements?
Use the listed configuration as the confirmed starting point and state each requested change in the RFQ. Unlisted options should not be assumed to be standard; the supplier should confirm feasibility and the final specification before production.
What is the MOQ for a bulk order?
The listed minimum order quantity is 100 pieces. For repeat demand or larger project volumes, share your expected order schedule so the quotation can be reviewed against the listed monthly supply ability and your delivery plan.
How should a buyer handle testing and certification requirements?
Specific certificate numbers and unverified optical limits are not added to this page. If your tender, customer or engineering standard requires particular reports or thresholds, include them in the RFQ and obtain written confirmation as part of the order approval process.
What does Evolux add to a project fiber pigtail order?
A project order is easier to control when the supplier confirms the complete BOM rather than a connector name alone. The Evolux team can review the connector, polish, fiber grade, construction, quantity and requested documents together, giving procurement a clearer basis for approval and repeat ordering.
Hot Tags: Evolux E2000 Fiber Optic Pigtail, China Evolux E2000 Fiber Optic Pigtail manufacturers, suppliers, factory, fiber optic pigtail in telecommunication, optical fiber pigtail advantage, fiber optic pigtail tensile strength, optical fiber pigtail manufacturer, single mode optical fiber pigtail, optical fiber pigtail ce marked
