Evolux Fiber MTP TO LC UPC 8CORE OM4 3.0MM PATCH CORD support data center migration to higher data rates when utilized with our trunks. MTP® cables are an efficient solution for high-density fiber patching in data centers, eliminating the need for time-consuming field termination. They are designed to save space and simplify cable management while providing cost-effective patching options within cabinets. For backbone trunk deployments, our MTP OM4 12-fiber multimode trunk patch cables offer a complementary high-density cabling solution.
Specification
| Connector A | MTP Female (Pinless) | Connector B | LC UPC Duplex |
| Fiber Mode | OM4 50/125μm | Wavelength | 850/1300nm |
| 40/100G Ethernet Distance | 150m at 850nm | 10G Ethernet Distance | 400m at 850nm |
| MTP Connector IL | 0.35dB Max (0.15dB Typ.) | LC Connector IL | ≤0.2dB |
| MTP Connector RL | ≥20dB | LC Connector RL | ≥30dB |
| Attenuation at 850nm | ≤2.3dB/km | Attenuation at 1300nm | ≤0.6dB/km |
| Cable Jacket | Plenum (OFNP) | Fiber Count | 8 Fibers |
| Cable Outside Diameter (OD) | 3.0mm | Breakout Outside Diameter (OD) | 2.0mm |
| Installation Tensile Load | 66N | Tensile Strength (Long/Short Term) | 80/240N |
| Operating Temperature | (-10 to 60°C (14 to 140℉) | Storage Temperature | (-10 to 70°C (14 to 158℉) |
Features
Top-quality Craftsmanship ensures a relable transmission
-MTP Connector:Providing consistent signals and enabling adaptable system design.
-Fiber:Enabling increased flexibility in cable routing and storage through tighter bends.
-Jacket:Reducing damage potential through fire-resistant and low-smoke materials.
Optimizing cabling density to meet various environmental conditions.
- Reducing installation costs by minimizing waste, improving cable management and streamlining deployment.
Upgrading your network is made easy with a user-friendly plug-in.
- MTP®-LC harness cables facilitate rapid data rate upgrades, including the migration from 10G to 40G. To better understand how OM4 compares with other multimode grades before committing to a cabling infrastructure, see our overview of OM1 through OM5 multimode fiber type differences and bandwidth ratings.
Applications
Data Center 10G to 40G/100G Network Migration
This MTP-LC breakout cable provides a direct upgrade path from 10G to 40G/100G Ethernet infrastructure. The 8-fiber configuration matches standard 40G QSFP+ transceiver requirements, enabling seamless data center speed migration without replacing existing LC-based patch panels. For a full planning guide on structured cabling choices at 100G, refer to our article on how to choose the right fiber optic cabling for 100G data center deployments.
High-Density Fiber Patching in Colocation Facilities
Designed for rack-to-rack and cabinet-level patching where space is limited. The MTP-to-LC fanout design consolidates eight fiber connections into a single MTP interface, reducing cable congestion in high-density colocation environments.
Plenum Air Space Installation for Enterprise Buildings
The OFNP plenum-rated jacket meets fire safety codes for installation in air handling spaces above drop ceilings. Enterprise campus networks and commercial buildings requiring code-compliant fiber cabling benefit from this plenum breakout patch cord.
Short-Reach 40G QSFP+ to SFP+ Interconnection
Connects 40G QSFP+ switch ports directly to four 10G SFP+ ports using the 8-fiber breakout structure. This MTP harness cable for QSFP-to-SFP conversion eliminates the need for separate breakout modules. When the patching endpoint requires a fixed adapter port instead of a direct cable run, our MTP/MPO fiber optic adapters for 8, 12, and 24-fiber panel mounting provide the matching interface.
Testing and Lab Equipment Fiber Connectivity
Supports optical test equipment and lab setups that require multimode OM4 connections with verified low insertion loss. The factory-tested 0.35dB MTP connector ensures accurate measurement baselines for fiber testing applications.
FAQ
Q1: What is the difference between MTP and MPO connectors on this breakout cable?
A: MTP is a registered brand of US Conec that meets MPO standards with enhanced features like oval guide pins and metal pin clamps. This cable uses genuine US Conec MTP connectors with 0.35dB maximum insertion loss, which outperforms generic MPO connectors in signal consistency.
Q2: Can this 8-fiber MTP-LC cable support 40G QSFP+ transceivers?
A: Yes. The 8-fiber configuration matches the channel requirements for 40GBASE-SR4 QSFP+ modules. Each 40G port uses 4 fibers for transmit and 4 fibers for receive, making this MTP to LC breakout cable compatible with standard 40G multimode transceivers. For a side-by-side comparison of when to use LC versus MTP/MPO interfaces in high-density environments, see our practical guide to LC vs MTP/MPO connector selection for high-density fiber patching.
Q3: What does OFNP plenum rating mean for this fiber patch cable?
A: OFNP (Optical Fiber Nonconductive Plenum) indicates the cable jacket is fire-resistant and produces low smoke when exposed to flame. This plenum-rated MTP breakout cable is approved for installation in building air return spaces without conduit.
Q4: How far can this OM4 MTP-LC cable transmit 40G or 100G signals?
A: According to the specifications, this OM4 multimode patch cable supports 40G/100G Ethernet transmission up to 150 meters at 850nm wavelength, and 10G Ethernet up to 400 meters.
Q5: Is this MTP connector male (pinned) or female (pinless)?
A: The MTP end is female (pinless). When connecting to MTP trunk cables or cassettes, ensure the mating connector is male (pinned) to achieve proper alignment and low-loss connection.
Q6: What applications require a plenum-rated MTP to LC fiber cable?
A: Building codes typically require plenum-rated cables in ceiling air return plenums, raised floor spaces in data centers, and any area where air circulates for HVAC systems. This OFNP-jacketed MTP fanout cable meets those installation requirements.
Q7: Can I order custom lengths for this MTP-LC 8-fiber breakout cable?
A: Yes. Custom cable lengths, alternative fiber counts, and different breakout leg configurations are available upon request. Contact sales to specify your MTP breakout harness requirements for bulk or project orders.
Hot Tags: MTP to LC 8-Fiber OM4 Plenum Breakout Cable with 0.35dB Low-Loss MTP Connector, China MTP to LC 8-Fiber OM4 Plenum Breakout Cable with 0.35dB Low-Loss MTP Connector manufacturers, suppliers, factory, fiber optic patch cord for video transmission, fiber optic patch cord with mpo connector, fiber optic patch cord for submarine optical network, fiber optic patch cord with mt rj connector, fiber optic patch cord factory, fiber optic patch cord for media designers
