What is LC LC patch cable?
LC-LC fiber patch cable with two LC fiber connectors terminated at both ends is the most commonly used fiber optic cable type in the industry. Compared with other common fiber optic cables, LC fiber cables offer high density and reliable performance in most applications
Our cables are 100% optically inspected and tested for insertion loss.
Specification
| Connector Type | LC UPC to LC UPC | Fiber Mode | OS2 9/125μm |
| Fiber Grade | G657A/G652D | Wavelength | 1310/1550nm |
| Insertion Loss | ≤0.3dB | Return Loss | ≥50dB |
| Min. Bend Radius(Fiber Core) | 10mm | Min. Bend Radius(Fiber Cable) | 10/5D (Dynamic/Static) |
| Fiber Count | Simplex | Cable Jacket | LSZH |
| Operating Temperature | -20~70°C | Storage Temperature | -40~80°C |
Fiber Optic Cleaning
Dirty connectors are one of the major problems in fiber optics, causing high connector loss, high reflectance and contaminating transceivers. Network operators claim that 15-50% of all network problems can be traced to dirty connectors causing connection problems.
Airborne dirt particles are about the size of the core of SM fiber and are usually silica based - they may scratch PC connectors if not removed! Patch panels have mating adapters that can become contaminated if left open to the air or scrape off foreign particles under repeated usage. Test equipment has fiber-bulkhead outputs that need periodic cleaning, since they may have hundreds of insertions of test cables in short time frames.
We recommend you always keep dust caps on connectors, bulkhead splices, patch panels or anything else that is going to have a connection made with it. Not only will it prevent additional dust buildup, but it will prevent contamination from being touched or damaged from dropping.
Always clean connectors before mating, whether for testing or making network connections.
When testing, we recommend that connectors on both the reference and tested cables be cleaned before every test, as every time the connector is exposed to air, it can accumulate dust. Typical airborne dust is almost the size of the SM fiber core, so cleaning every time is even more important than MM. A secondary effect is that if the connectors are dirty, it can scratch the end finish (most dirt is silica (sand) based) and cause higher reflectance if not loss.
Hot Tags: fiber optic lc lc patch cable single mode simplex, China fiber optic lc lc patch cable single mode simplex manufacturers, suppliers, factory, fiber optic patch cord for local area network, fiber optic patch cord for media reporters in chief, custom fiber optic patch cord, fiber optic patch cord for underground optical network, fiber optic link cable, fiber patch cord
