Connection steps of fiber optic quick connector

1. Fiber optic quick connector is a very innovative field-terminated connector, which contains factory pre-installed optical fiber, pre-polished ceramic ferrule and a mechanical connection mechanism.
2. When terminating, you only need to insert the incoming optical fiber or indoor optical fiber into the mechanical splicing mechanism without using other tools. The terminating process only takes about 2 minutes, which greatly saves installation time.
3. The ferrule and end face inside the fiber optic quick connector have been pre-grinded and pre-polished before leaving the factory. The mechanical connection mechanism is located at the end of the ferrule to fix the inserted optical fiber.
4. The mechanical splicing mechanism is mainly composed of a V-shaped groove and a clamping element; when it is necessary to insert an optical fiber, the V-shaped groove is opened with a wedge-shaped clamp to facilitate the smooth insertion of the optical fiber.
5. After the optical fiber is inserted into the V-shaped groove and fixed, just pull out the wedge-shaped clip from the V-shaped groove.