Evolux Fiber Fiber Optic Patch Cord LC to MPO 8 Core 3.0mm support data center migration to higher data rates when utilized with our trunks. MPO cables are an efficient solution for high-density fiber patching in data centers, eliminating the need for time-consuming field termination. They are designed to save space and simplify cable management while providing cost-effective patching options within cabinets.
Specification
| Connector A | MPO | Connector B | LC |
| Fiber Mode | OM4 50/125μm | Wavelength | 850/1300nm |
| 40/100G Ethernet Distance | 150m at 850nm | 10G Ethernet Distance | 400m at 850nm |
| MTP Connector IL | 0.35dB Max (0.15dB Typ.) | FC Connector IL | ≤0.2dB |
| MTP Connector RL | ≥20dB | FC Connector RL | ≥30dB |
| Attenuation at 850nm | ≤2.3dB/km | Attenuation at 1300nm | ≤0.6dB/km |
| Cable Jacket | Plenum (OFNP) | Fiber Count | 8 Fibers |
| Cable Outside Diameter (OD) | 3.0mm | Breakout Outside Diameter (OD) | 3.0mm |
| Installation Tensile Load | 66N | Tensile Strength (Long/Short Term) | 80/240N |
| Operating Temperature | (-10 to 60°C (14 to 140℉) | Storage Temperature | (-10 to 70°C (14 to 158℉) |
Features
Top-quality Craftsmanship ensures a relable transmission
-MPO Connector:Providing consistent signals and enabling adaptable system design.
-Fiber:Enabling increased flexibility in cable routing and storage through tighter bends.
-Jacket:Reducing damage potential through fire-resistant and low-smoke materials.
Optimizing cabling density to meet various environmental conditions.
- Reducing installation costs by minimizing waste, improving cable management and streamlining deployment.
Upgrading your network is made easy with a user-friendly plug-in.
- LC-MPO harness cables facilitate rapid data rate upgrades, including the migration from 10G to 40G.
Applications
40G/100G Data Center Backbone Cabling
Designed for high-speed parallel optic links, this MTP to LC breakout cable enables direct connection between QSFP+ transceivers and LC-based patch panels, supporting 40G and 100G Ethernet within 150 meters at 850nm.
10G to 40G Network Migration
The harness configuration facilitates seamless transition from 10G to 40G infrastructure by converting a single MTP trunk into individual LC duplex connections, minimizing disruption during network upgrades.
Plenum Air Space Installations
With OFNP fire-safety rated jacket, this cable is approved for installation in plenum air handling spaces above suspended ceilings or below raised floors where building codes require flame-retardant and low-smoke materials.
High-Density Cabinet Patching
The pre-terminated MTP to LC design eliminates field splicing, reduces installation time, and simplifies cable management in space-constrained server racks and telecom equipment cabinets.
Switch-to-Cassette Module Connections
Commonly used to connect MTP cassettes or adapter panels with LC ports on switches, routers, or storage equipment, enabling organized and scalable structured cabling within data center rows.
Tight-Space Routing with Bend-Sensitive Requirements
The Corning ClearCurve fiber core with 7.5mm minimum bend radius allows flexible cable routing around obstacles and tight corners without signal degradation in congested pathways.
FAQ
Q: What is an MTP to LC 8-fiber OM4 breakout cable?
A: It is a fiber harness assembly with one MTP connector on one end that breaks out into four LC duplex connectors (or eight LC simplex connectors) on the other end, using OM4 multimode fiber for high-bandwidth applications.
Q: What does the 0.35dB insertion loss specification mean?
A: The MTP connector end of this cable has a maximum insertion loss of 0.35dB (typical 0.15dB), indicating minimal signal attenuation at the connection point for reliable high-speed transmission.
Q: What is Corning ClearCurve fiber?
A: ClearCurve is Corning's bend-insensitive optical fiber technology that maintains signal integrity even when bent to a minimum radius of 7.5mm, enabling flexible routing in tight installation spaces.
Q: What does OFNP Plenum rating mean?
A: OFNP (Optical Fiber Nonconductive Plenum) is a fire-safety rating indicating the cable jacket meets strict flame spread and smoke generation requirements for installation in air-handling plenum spaces.
Q: Is this cable suitable for 40G and 100G networks?
A: Yes. The OM4 fiber supports 40G Ethernet up to 150 meters and 100G Ethernet at 850nm wavelength, making it ideal for short-reach data center backbone links.
Q: What distance can this cable support for 10G Ethernet?
A: This OM4 cable supports 10G Ethernet transmission up to 400 meters at 850nm wavelength.
Q: What do the color-coded MTP boots indicate?
A: Color-coded boots help identify fiber type, polish type, or connector grade at a glance, simplifying installation and maintenance in complex cabling environments.
Q: What is the cable outer diameter?
A: The main cable section and breakout legs both have a 3.0mm outer diameter, balancing flexibility with mechanical protection.
Q: Can this cable be used in standard riser applications instead of plenum?
A: Yes. Plenum-rated cables exceed riser requirements and can be installed in both plenum and riser environments.
Q: Is factory optical testing included?
A: Yes. Each cable assembly is factory terminated and 100% tested for insertion loss, return loss, and polarity before shipment to ensure consistent performance.
Q: How does MTP differ from MPO?
A: MTP is US Conec's high-performance brand of MPO-compatible connectors, featuring tighter tolerances, improved ferrule alignment, and removable housing for enhanced reliability.
Q: What should I verify before ordering?
A: Confirm the MTP connector gender (male with pins or female without pins), polarity type (Type A, B, or C), cable length, and breakout length to ensure compatibility with your existing infrastructure.
Hot Tags: MTP to LC 8-Fiber OM4 Plenum Breakout Cable with 0.35dB Low Loss, China MTP to LC 8-Fiber OM4 Plenum Breakout Cable with 0.35dB Low Loss manufacturers, suppliers, factory, fiber optic patch cord for enterprise network, fiber optic patch cord for shopping mall optical network, fiber optic jumper cable, duplex fiber optic patch cord, fiber optic patch cord retail, optical fiber jumper cord
