Key Features
Integrated Loopback + Attenuation – Combines signal looping and power reduction in a single duplexed module, eliminating the need for additional components and equipment
Multimode Compatibility – Optimized for OM1 (62.5/125µm), OM2, OM3, and OM4 (50/125µm) multimode fibers
Male-to-Male LC/UPC Configuration – LC/UPC connectors on both ends for direct connection to LC ports on equipment or patch panels
Fixed Attenuation Values – Available in 1–25dB range to suit diverse testing and power management requirements
High-Precision Alignment – Zirconia ceramic ferrule sleeves ensure accurate fiber core alignment and consistent performance
Low Insertion Loss – ≤0.3dB ensures minimal impact on the test signal itself
Durable Construction – Rugged protective housing with dust caps to prevent contamination when not in use
Technical Specifications
| Parameter | Specification |
|---|---|
| Connector Type | LC/UPC (Male to Male) |
| Fiber Mode | Multimode (MM) – 50/125µm or 62.5/125µm |
| Fiber Type Support | OM1, OM2, OM3, OM4 |
| Operating Wavelength | 850nm / 1300nm |
| Attenuation Range | 1–25dB (fixed values, customizable) |
| Attenuation Tolerance | 1–10dB: ±0.5dB / 11–20dB: ±1.0dB |
| Insertion Loss | ≤0.3dB |
| Return Loss | ≥20–25dB |
| Polarization Dependent Loss (PDL) | ≤0.2dB |
| Maximum Optical Input Power | 200mW |
| Mating Durability | ≥500 to >1,000 cycles |
| Housing Material | Polymer / Plastic |
| Ferrule Material | Zirconia Ceramic |
| Operating Temperature | -40°C to +80°C |
| Storage Temperature | -40°C to +85°C |
| Humidity | 95% RH |
Applications
Equipment Self-Test & Diagnostics – Sending a loopback test to network equipment to diagnose transmission and reception issues
Receiver Overload Prevention – Reducing high-power signals to safe levels for receiver sensitivity testing
Network Restoration – Temporary loopback patching during system recovery and troubleshooting
Data Center Burn-In Testing – High-density loopback testing for 10G/40G/100G transceivers
Laboratory & R&D Testing – Simulating link conditions and attenuation in controlled environments
CATV & Telecommunication Systems – In-line power calibration and testing
Hot Tags: lc upc to lc upc om4 loopback attenuator, China lc upc to lc upc om4 loopback attenuator manufacturers, suppliers, factory, fiber optic e2000 adapter, fiber optic easy to install adapter, fiber optic rackmount adapter, fiber optic st adapter, fiber optic termination adapter, optical fiber cross connect adapter
